Recently, the Motorola Razr 50, which is identified by the model number XT2453-2, was spotted on Chinese certification sites such as 3C and TENAA. Now the same certification agencies have approved the Razr 50 Ultra. The mentioned device was spotted under the model number XT2451-4. Here are the details that became known thanks to the 3C certification of the Razr 50 Ultra.
According to TENAA’s listing, the Motorola Razr 50 Ultra will have a 6.9-inch foldable OLED screen with FHD+ (1080 x 2460 pixels) resolution and reportedly support a 120Hz refresh rate. On the outside, the 4-inch OLED screen will have a resolution of 1272 x 1080 pixels.
Under the hood, the device is likely to be powered by a 3.0GHz chip, possibly a Snapdragon 8s Gen 3. It could come with 8GB/12GB/16GB/18GB of RAM and 128GB/256GB/512GB/1TB of storage.
A dual battery with a nominal capacity of 998 mAh + 2832 mAh (typical capacity of approximately 4,000 mAh) is expected to power the device. The device may come with a 68W charger, but only supports 45W charging. It will have a 32-megapixel camera on the front and a dual rear camera with a 50-megapixel primary sensor and a 50-megapixel sensor with 2x optical zoom.
The Razr 50 Ultra can be equipped with a fingerprint scanner on the side for security. The device measures 171.3 x 73.9 x 7.2 mm and weighs 188 grams. According to other reports, the Razr 50 Ultra will also feature eSIM support, IPX8 water resistance, wireless charging, and Android 14 with Hello UI. It will be available in such colors as Midnight Blue, Spring Green, and Hot Pink.
The Razr 50 and 50 Ultra are likely to debut in June on the Chinese market.
The post Motorola Razr 50 Ultra: full specifications are now available thanks to TENAA certification first appeared on HiTechExpert.top.